How to replace hydraulic cylinder for tractor?

Hydraulic cylinder for tractor is an important part of tractor hydraulic system, which is mainly used to control the lifting and tilting of tractor plate. When the hydraulic cylinder fails, it needs to be replaced in time to ensure the normal operation of the tractor. Next, we will explain how to replace a hydraulic cylinder for tractor.

1.Preparation

Prepare the required tools and materials, such as wrenches, wrench sockets, hydraulic wrenches, screwdrivers, cleaners, lubricants, seals, and new hydraulic cylinders. Ensure that the tractor is shut down, and cut off the power supply to the hydraulic system and the supply of hydraulic oil to avoid accidental injury. At the same time, prepare the oil pan or oil drum to receive the leaking hydraulic oil.

2.Drain hydraulic oil

Close the main control valve of the hydraulic system to prevent hydraulic oil flow, and open the oil discharge valve of the hydraulic system and empty the hydraulic oil into the oil pan or oil drum. Also, please pay attention to keeping environment clean and avoid hydraulic oil pollution.

3.Remove the old hydraulic cylinder for tractor

First, we need to remove the hydraulic tubing: Using a wrench or wrench socket, unscrew the nut on the hydraulic tubing counterclockwise to remove the hydraulic tubing from the cylinder. Pay attention to avoid leakage of hydraulic oil.

Then, remove the hydraulic cylinder: The hydraulic cylinder for tractor is usually bolted or pinned to the tractor frame or other components. Using a wrench or wrench socket, unscrew the bolts or pins on the hydraulic cylinder counterclockwise to remove the hydraulic cylinder from the frame or other components. Before removing the hydraulic cylinder for tractor, it is necessary to support the hydraulic cylinder to prevent it from suddenly falling and causing injury.

4.Install the new hydraulic cylinder for tractor

Install the new hydraulic cylinder onto the tractor plate and secure it using connection bolts or pins. Ensure that the hydraulic cylinder is installed in the correct position and direction. Hydraulic tubing connection: connect the hydraulic tubing to the import and export of new hydraulic oil cylinder, and USES spanner or wrench socket clockwise tighten nut, ensure the connection is firm.

In short, the replacement of hydraulic cylinder for tractor is an important maintenance work, and choosing tractor hydraulic cylinder is very important. TOLENG can provide you with high-quality hydraulic cylinders and technical  guidance, welcome to consult, Please contact us at sale01@phtl.cn.